It could depend on several reasons as to why it is hard to pull through your vape. Chances are that you have been pulling so hard on your vape that you might have blocked the tank by flooding it. Or maybe the battery is not working. However, problems regarding this are simple to identify and troubleshooting as well.
- 1 Related Questions To: Vape Pen Hard To Pull
- 1.1 What is Vape or Vaping?
- 1.2 Chances are your vape pen cartridge is clogged :
- 1.3 How to fix the problems when they start showing?
- 1.4 What do I do when the cartridge of the vape is clogged?
- 1.5 What do I do when my dab pen does not blow any smoke?
- 1.6 What does it mean when your vape pen blinks three times?
- 1.7 Should you turn off your vape?
- 1.8 What causes spit back Vaping?
- 1.9 Does more airflow use more juice?
- 1.10 What is vape coil?
- 1.11 Why do I have to pull hard on my vape?
Related Questions To: Vape Pen Hard To Pull
What is Vape or Vaping?
For new learners, vaping is defined as inhaling a vapor created by an electronic cigarette or other vaping specific devices. These are battery-powered devices that have liquid-filled cartridges that usually consist of nicotine, flavourings and other chemicals. The heated liquid is turned into vapour which the person inhales and exhales, just like a real cigarette. There are many varieties of these devices, depending on what you’re consuming and how you’re consuming it.
Cannabis vape pens have grown in popularity due to the easiness, safety and comfort that consumers experience compared to the actual rolling of joints or smoking a pack of cigarettes.
While vaping has its share of advantages and disadvantages when it comes to one’s health and the environment, many people, whether they are new to vaping or not, sometimes face some similar problems. One of them being difficulty in pulling on the vape properly. They complain that it is sometimes hard to pull through, even though they have a high quality and top-rated electronic device. Sometimes, their coil seems to burn as though something is blocking it, and sometimes, they pull the liquid concentrate instead of any vapor.
Well, it is safe to say that this is not a rare occurrence, and it happens more commonly than you think. So where does the problem lie in this relatively straightforward issue?
Chances are your vape pen cartridge is clogged :
Vape cartridges are prone to become clogged when the airflow holes experience a blockage. It is usually caused by some oily residue left behind in the cartridge after use. An easy way to fix this issue is by removing the cartridges, taking a Q-Tip, dipping it deep into those airflow holes in the cartridge and poking around until the oily residue is all gone. If you’re using disposable vapes, it is not as easy to do so because the cartridges are harder to take out unless you use some tools.
Take a QTip deep into your mouthpiece and twist it. You will likely be surprised at the amount of debris that has accumulated in the mouthpiece and obstructed the airflow.
If the cartridge airflow holes aren’t the main cause of the blockage then it could be that something is obstructing the mouthpiece. Gently use a safety pin or an item similar to mouthpiece to check if anything is blocking the path of the air, and also check if you can safely fix it manually.
At first, ensure that battery is charge & oil is present in the cartridge. Avoid overfilling the cartridge/tank with juice and avoid leaving the device without use for a long period of time to prevent this problem.
The airflow setting of the vape pen is incorrect :
When it comes to these devices, getting the correct and proper airflow setting is also very important to make sure that the oil moves freely. While filling up the vape, make sure that the airflow holes are completely shut. While using the vape pen, those airflow holes should be open enough so that you don’t have to pull the air harshly and can use the pen with ease. Inhaling too forcefully can cause flooding which can lead to airflow problems and leaking of the liquids. Gently inhale while letting the wicks do the heavy work.
The cartridge of the vape is shut too tight :
Twisting the vape cartridge too tight can also lead to your vape not working properly. Do not twist it close so over passionately that it blocks off the airflow holes of the vape cartridge. Gently screw your cartridges onto the battery and avoid screwing it too tight.
The oil viscosity of the vape :
Another thing to keep in check is the oil viscosity of your vape pen. While it is not directly proportional to airflow, it can easily be mistaken as one. Different oils have different properties and naturally, they have their own needs and conditions to warm up and work satisfactorily. If you’re using thicker oils, preheat for a few seconds before hitting it, because thick oils need more time to warm up. Allow some time for the oil to warm up before using it.
How to fix the problems when they start showing?
Now the question arises of how to fix the trouble when it arises. First, make sure that the problem lies with the airflow and not anything else. Often it happens that the vape cartridge is not producing vapor at all because of technical issues like the voltage, temperature or wattage. You have to make sure that you are setting your vape pen as recommended by the manufacturers of your device and the concentrate. Otherwise, the vape pen will not produce any vapor for you to pull through.
If your wattage is low, your concentrate would not be vaporising as quickly as the wick supplying. Try to increase the wattage if your device allows it.
What do I do when the cartridge of the vape is clogged?
If the problem related to your device is not the airflow or technicalities like wattage or temperature, then it is highly likely that the cartridge is clogged. Here is how you can unclog it, by following this simple process.
Prepare your coil by taking “dry hits” of your cartridge without battery and gently blowing it out air. Locate the airflow holes of the cartridge and check if they are open. If you see them clogged with residue then you can clean them up using a Q-Tip or a similar instrument where the coil screws are present. Check if the cartridge airflow holes are blocked by any other components of the device. If so, try to assemble your device in a way in which it does not cause hindrance to the airflow holes.
What do I do when my dab pen does not blow any smoke?
If you are an expert and seeking a more potent high then you will naturally lean towards dab pens instead of vape pens. They both are fundamentally different in various ways. For example, dab pens are manufactured for thicker concentrates than vape pens.
When it comes to dab pens, there are various issues to consider. The most common problem is related to the battery, or the box mod. You have to get the correct setting for the coil in your dab pen. Devices that operate on the box or vape mod batteries require thorough research so you are familiar with your device and how it operates. Some box mods have temperature control capabilities, but not all coil types does. “If you try to scrub with a Kanthal coil in temperature control mode, you won’t get steam.
Not every type of coil is suited for box mods. If the wattage setting of the box mod is lower than recommended then you would not get satisfactory vapor, but weak and feeble vapor instead.
However, if you have a high-quality dab pen, those are highly modifiable and can work with various heating coils and batteries. Getting to the bottom of this common issue is just making yourself familiar with your device and its settings.
Three blinks of the G Pen’s battery generally indicate a problem with the communication between the G Pen’s battery and the G Pen’s coil. To fix this issue, make sure the connection between the two is clean and secure. If the battery flashes 3 times on each tank / coil, the problem is with the G Pen battery.
Should you turn off your vape?
You should turn off vape batteries after you are done using them. When you are not using your device, you can save power by turning it off. When the vaporizer is on, it will continue to draw some of the battery power. Turn it off and you’ll save a good chunk of battery life.
What causes spit back Vaping?
As the name suggests, spits are the drops of hot liquid that they spit up the mouthpiece and into your mouth when you vape. Spit backs occur when the e-liquid reaches the actual coil. In most cases, e-liquid leakage to the coils is due to flooding.
Does more airflow use more juice?
Increasing the airflow can reduce the amount of juice needed as it will remain in the coils. When you are using lower airflow, you will gain more flavor from your vape. With increased airflow, you’ll experience less flavor of juice, fewer hard throats, and more steam.
What is vape coil?
Today, most e-cigarettes or vaporizer kits that are “open systems” have interchangeable “atomizer heads”. These are often simply called “coils” and contain the coil wire and wick material. The wick absorbs the liquid and the coil wire heats the juice and turns it into vapor. Most of the coils contain cotton or ceramic as wick material.
Why do I have to pull hard on my vape?
Pulling hard on your vape causes the heating wicks to absorb more than require liquid concentrate than the coil can vaporise. Excessive oily residue clogs airflow holes of the cartridge and results in leaking and no vapor. To fix it, take apart your device carefully and clean the battery threading, tanks, airflow holes and mouthpiece. You can reassemble the vape pen after proper cleaning and test it out by pulling on it gently, inhaling slowly and not too harshly to make sure it does not happen again.
The wicks absorb the juice in the tank. When the device is pulled, a vacuum effect is created that draws juice into the wicks. If you pull too hard, you can extract more juice and the coil can vaporize. Tugging too hard can cause flooding.
You can make sure that you do not experience such problems by modulating your pulling so that you are not pulling so hard on the device that it becomes clogged. Regularly clean your vape pens to clean out the residues left behind by the liquid concentrates and always use the correct, recommended setting for your devices as instructed by the manufacturer.
Happy Vaping! Hopefully, this article has helped you in troubleshooting.